Stix® Waterborne Bonding Primer is a premium quality, waterborne, acrylic urethane primer/sealer with unparalleled adhesion to the most challenging surfaces, including PVC, Vinyl, Most Plastics, Glass, Tile, Glazed Block, Glossy Paints, Pre-Coated Siding, Fiberglass, and Galvanized Metals. Stix is also ideal for use on plaster, drywall, wood, and non-ferrous metals, where a low ambient or surface temperature would present a problem for conventional primers. Offers an extremely hard film when cured. Use it on interior and exterior surfaces and topcoat with almost any type of coating including Alkyd, Acrylic Latex, Urethane, Epoxy, and Lacquer Finishes.

• Strongly Bonds to Glossy Surfaces

• Levels to a smooth surface

• Unparalleled Adhesion to the Most Challenging Surfaces.

• Cures in temperatures as low as 35°F

• Creates an extremely hard film

• Excellent enamel holdout

• Can be top coated with almost any product

• Not recommended as a whole house exterior primer over wood or for wood decking

Recommended for Interior and Exterior surfaces. Drywall, Plaster, Ceiling, Acoustical Tile, Wood Trim & Doors, Formica, Ceramic Tiles, Glossy Surfaces, PVC, Most Plastics, Masonry Walls, Wood, Trim, Shutters, Masonry, Stucco, Concrete, Cement Block, Galvanized Metal, Aluminum, etc.

Coverage 300-400 sq.ft. per gallon, 1/2-hour dry to touch, 3-4 hour recoat time, application temp range 35-90 (°F). Soap and water clean up.